Automatic System

Fogging System

The spraying station are ceiling mounted. The standard 8 binary nozzles are placed radically around the ring-shaped distributor. This special design of spraying station will produce the fine mist which will prolong the contact time of disinfectant to the air. This results in the improvement of the operational sanitary status. The disinfectant are flushed out both by water and clean air. The number of nozzle stations depends on several factors, e.g. room size, geometry of the facilities, germ concentration, air convection and production equipment.

Category:

FOGGING HEAD STATION NTM-05

DESCRIPTION
• Adimission pressure for water / disinfectant solution Min 0.5 bars / Max 6.0 bars
• Flow rate of water / disinfectant Min 8.0 l/h at 0.5 bars / Max 210 l/h at 6.0 bars
• Clean air pressure Min 3.0 bars / Max 6.0 bars
• Clean air flow rate Min 7.5 m3/hr. at 2 bars / Max. 20 m3/hr. at 6 bars
• Automization volumn approx. 6x6x6 (216 m3)

SS FOGGING CONTROLLER BOX

DESCRIPTION

• PLC controller in ss cabinet
• 220 V/ 50 Hz input
• Multi switch (on / off) for each zone selection
• Program installation

SS MIXING (DOSING) AND VALVE SYSTEM

DESCRIPTION

• Chemical dosing pump.
• Water regulator with gauge, G3/4”
• Water filter, G3/4”
• Air pressure regulator with gauge, G3/4”
• SS Non return valve, G3/4”
• Solenoid valve for Air and Water, G1/2” 24 VAC or VDC
• SS Manifold for Air and SS Manifold for fogging sanitizer solution

Related products

Read more

Mobile Unit

error: Content is protected !!